Видео

Hello. We call for this kit to be a 12-16 hour install for a first time installation. We have a great network of shops that we can recommend depending on your location. Please send us an email at sales@hellionturbo.com and we can try to assist.

The kit is designed around the factory manifolds or factory location tubular headers, long tubes will not fit.

@@HellionPowerSys ok thank you!

@@Unpluggeddiagandprogramming You're welcome!

Hello. All that is needed for a pump gas setup is a 1000cc injector. For more advanced setups a JMS Fuelmax can be optioned to boost fuel pump output.

This kit fits all models, including the 300!

We are located in New Mexico, but we have a great group of dealers in Florida. Where are you located?

Gearhead fabrications in Jensen beach has done many, including with the billet manifold. Those trucks make well over 1000 rwhp on E85.

Hello, we have the turbos in a position that makes it possible to drive the vehicle every day. The factory exhaust is low in the middle of the car, but we have turbos tight to the engine closer to the front, so no worries!

@HellionPowerSys beautiful. Now when I have a spare $25k lying around, I'll be sure to hit y'all up. 😂

Hello, It actually improves your gas mileage due to the turbos adding efficiency at part throttle, a win - win!

Yes! Bone stock and still going strong.

Hello, please email us at sales@hellionturbo.com and we can assist you.

We are ready to go!!

@@HellionPowerSys is there an email to reach y'all at? Just have some pre-purchase fears/jitters that I bet could be assuaged if I could get a couple questions answered!

@@opinion-eater432We can absolutely help you! Please email sales@hellionturbo.com and we can get with you right away.

It sure is! Bone stock trans and it handles the power well.

This Jeep is a beast. Congrats on the build

​@HellionPowerSys what site can I enquire about a set up for a 2017 srt

Hello. 8 lbs of supercharged boost will load the engine past what it can handle. With turbos, the engine is not going through as much strain to make the power, so it can handle it.

I wouldn’t

Actually the ground clearance and height of the exhaust is the same as stock!

Kit pricing starts at $9995! www.hellionturbo.com/product/hellion-2012-2022-jeep-grand-cherokee-srt-twin-turbo-system/

I need to know this as well. Got Kooks on it already.

Hello, the installation charges can differ depending on the options chosen. The kit is a bolt on, with no cutting or modification to the truck. We have a network of trusted installation facilities that can install the complete system. Where are you located?

Yes

Not currently, but we have one in development!

2.9

Nope! This car is completely stock. Turbos just do not strain the engine as much as a supercharger, so we can make more rwhp per pound of boost.

It sure is!!

@@HellionPowerSys can we get an update ?

@@buildingmanagement1835 This and another build identical to it we did at the same time are still running great! With adjustable boost we can keep each build powerful and safe at the same time.

It is a 100% bolt on kit! No cutting of any parts and can be removed and put back to stock at any time.

Satera Tuning has made over 1050 rwhp compounded on a 100% street ride with stock exhaust!

@HellionPowerSys I'd be interested to see some 1/4 times and 60-130 times to see how it compares to my current setup. My best 1/4 is 9.7 and 60-130 is in the 5sec range. Debating Twins or Whipple for next upgrade. 🤙

@@srt2fst I am sure some of that data will show up as more of our dealers and customers disclose, but we can guarantee that this is the most powerful option for the WK2, you would not be disappointed!

@@HellionPowerSys I look forward to seeing some times. 🤙

Hello. This kit is designed to be driven daily with no issues whatsoever. It can be driven in all weather conditions and the power is adjustable from a supplied boost controller that you control from inside the truck!

Hello. The turbos in this system are actually mounted right next to the engine up front. They are designed for all weather conditions (water, snow, debris, etc.) so no worries!

I had a STS remote mount turbo kit about 20 years ago on a GMC Sierra. You will need to get a filter relocation or a snorkel if you plan on driving it in any Wet conditions.

Absolutely! We keep the boost at around 5-7 with stock engines, a great increase in power with plenty of strength.

You’re the man!

Yes it will!!

So that means it will fit a 2014 5.7 correct lol

Hello. Yes, you will need to swap the exhaust manifolds from 5.7 specific to 6.4 SRT specific for the kit to fit.

@@HellionPowerSyswas this power made on 93? and what else was done to engine besides rods and pistons?Thanks

@@SrtHemiPower It sure was. Drop in rods and pistons with a small cam. Everything else is stock. Its one of the most amazing kits we have ever made. A true sleeper that can outrun anything on the road!

Honestly I can see they’re not responding so the only thing I can recommend is being able to weld some brackets for custom mounts. Might have to. And it’ll take some time and money if that’s okay with you. You’ll also have to prolly change the piping. Just make sure you have the same engine specs and just use your imagination if you’re aware on how turbos work. Trust me. No kit is actually meant for a car. You can make anything fit as long as you’re creative enough. Your minds your limit. So yes you technically can fit it. My bad for making this long

Yes! We installed this on the famed show Engine Power! www.powernationtv.com/episode/EP2015-01/600-horsepower-twin-turbo-2014-camaro

We recommend a smaller cam, possibly a turbo grind to maximize power. The stock cam works amazingly well!

Hello, you can choose, but a popular injector is the Hellcat or Demon injector for lower boost levels.

@@HellionPowerSys thanks I’ll be forging the internals as well! I’m pumped!

@@HellionPowerSys oh will this fit the ‘18 Durango SRT? Thanks!

Stock internals and trans?

@@anthonycruz8011 yes

It is only necessary if you want to run over 7 psi. We designed the kit to make killer power at a base 5-7 psi setting. You can forge the internals at any time, then turn up the boost!

Hello, Its 100% drivable and has instant power. The quick spool Hellion turbos boost very quickly and carry that power all the way to redline.

​@HellionPowerSys very nice, what would you estimate the power would be to the wheels if I kept everything stock on my R/T

They replied 3 months after you made this comment and said it's still running... BTW, nice emoji, Susan.

​@@DemocratsRDemonsyes, but they won't be able to turn up the boost either.

Have you done it yet??